All the manuscripts should be sent by email as an attachment to relative email address and should be typed in single line spacing and 10 pt.
Research Articles are innovative reports whose conclusions represent a substantial advance in the understanding of a significant problem and have directly, far-reaching implications. They should have no more than 60 references.
Research articles are typically 3,000~5,000 words of text (including references, notes and captions, or ~5 printed pages) are expected to present a major advance.
Research Articles include an abstract, an introduction, up to six figures or tables, sections with brief subheadings (less than six in total and less than 40 characters). Materials and Methods should usually be included which will also be needed to support the paper's conclusions.
Short Communication and Letters are short reports of creative research focused on an outstanding finding whose importance means that it will be of interest to scientists in other fields. They should have less than 30 references.
They begin with a fully referenced paragraph, of about 200 words, (definitely no more than 300 words) aimed at readers in other disciplines. The letters (up to ~2500 words including references, notes and captions or ~3 printed pages) should include an abstract, an introductory paragraph, up to four figures or tables. Materials and Methods should usually be included, which should be needed to support the paper's conclusions.
Reviews (up to 4500 words including references, notes and captions) describe new developments of interdisciplinary significance and highlight future directions. They include an abstract, an introduction that outlines the main theme, brief subheadings, and an outline of important unresolved questions. A maximum of 50 references is suggested. Most Reviews are solicited by the editors, but unsolicited submissions may also be considered.
AJOSAR Publication makes decisions about submitted papers as rapidly as possible. All manuscripts are handled electronically throughout the consideration process. Authors are usually informed within a week if the paper is not being considered.
Research articles present original research and address a clearly stated specific hypothesis or question. Papers should provide novel approaches and new insights into the problem addressed. A research article should divide into the following headings:
Review articles are an attempt by one or more authors to sum up the current state of the research on a particular topic. Ideally, the author searches for everything relevant to the topic, and then sorts it all out into a coherent view of the "state of the art" as it now stands. Interested scientists may write their review articles under the following headings:
A short communication is for a concise, but independent report representing a significant contribution. Short communication is not intended to publish preliminary results.
It should be no more than 2500 words, and could include two figures or tables. It should have at least 8 references. Scientists may prepare their short communications under the following headings.The title page should include: 1) complete manuscript title. 2)A short title which will be used as a “running head” 3) The full name of each author. 4) The departments and institutions in which the work was conducted. 5) Name and address for correspondence, including fax number, telephone number, and e-mail address. 6) Conflict of interest disclosure and declaration of funding sources. 7) Each author's contribution to the following criteria for authorship: conception and design; analysis and interpretation of the data; drafting of the article; critical revision of the article for important intellectual content; final approval of the article.
For Original Articles, New Methods, and Case Series submissions, a structured abstract of no more than 250 words should use all of the following headings: Aim of the study, Material and Methods, Results and Conclusion. For review articles the abstract page should be replaced by a Summary which must not exceed 200 words. List 3 to 5 key words.
Organize the manuscript into four main headings: Introduction, Materials and Methods, Results, and Discussion. Define abbreviations at first mention in text and in each table and figure.
State the objectives of the study and provide an adequate background, avoiding a detailed literature survey or to describe the results.
These should include sufficient information by which to judge the quality of the research. Any paper that is a randomized controlled trial should adhere to the CONSORT guidelines that can be found at: http://www.consort-statement.org Observational studies should also adhere to Strobe statement (http://www.strobe-statement.org/) Diagnostic accuracy studies should follow the Stard statement (http://www.stard-statement.org/) Systematic Reviews and Meta- Analyses should follow the PRISMA statement: http://www.prisma-statement.org/
These should be presented precisely without discussion of their importance. Do not duplicate information contained in tables and figures.
This should directly relate to the results of the study. Do not provide a general review of the topic. A conclusion at the end this section should be added
For Original Articles a summary box indicating the significance of this study should be included as follows: What is already known about this subject: 3-4 bullet points What are the new findings: 3-4 bullet points
Use only standard abbreviations. Avoid abbreviations in the title and abstract. The full term for which an abbreviation stands should precede its first use in the text unless it is a standard unit of measurement.
Acknowledgements should be made only to those who have made a substantial contribution to the study. Authors are responsible for obtaining written permission from people acknowledged by name in case readers infer their endorsement of data and conclusions.
These should be numbered in the order they appear in the text. They should be assigned Arabic numerals, which should be given in brackets, e.g. [13]. The last names and initials of all authors should be referred to if they are up to six, otherwise only the first three are referred, with et al following. Abbreviations of the titles of the journals are made according to the instructions of the Index Medicus. No periods should be placed at the end of abbreviations of the journal. References to journals are given as follows: Author(s), title of paper, journal abbreviation (in italics), year, volume (in bold) and pages in which the publication is included. References to books are given in the following order: Author(s), title, volume (if more than one), number of publication (if there are others besides the first), publisher, city, year. References to a book chapter: Author(s) of the chapter, title or chapter. In: editor(s), title of book, volume, publication, publisher, city, year and pages in which the chapter appears. Information from manuscripts submitted but not yet accepted should be cited in the text as “Unpublished observations” (in parentheses) The style and punctuation of the references conform to the following examples: Article: Katsanos KH, Tsianos VE, Maliouki M, Adamidi M, Vagias I, Tsianos EV. Obstruction and pseudo-obstruction in inflammatory bowel disease. Ann Gastroenterol 2010;23:246-253 Book: Sherlock S. Diseases of the liver and biliary system. Blackwell Sci: Oxford; 1989 Contribution to a Book: Radford-Smith, Jewell DP. Cytokines in inflammatory bowel disease. In: Allan R, Rhodes JM, Hanauer SB (editors): Inflammatory bowel diseases. Churchill Livingstone: New York; 1997, pp. 95-100.
These should be typewritten, double-spaced, each one on a separate page and numbered consecutively in Arabic numerals. Tables should include a short but concise title. Vertical and horizontal lines should be avoided in the tables. Place explanatory matter in footnotes, including any non-standard abbreviation. If data from another published or unpublished source are used, obtain permission and acknowledge fully.
Submit each figure as a separate file and in TIFF or EPS format with a resolution of at least 300 dpi. Number figures consecutively using Arabic numerals. Submit photographs scaled as near to printed size as possible. If magnification is significant, indicate using a bar on the print rather than a magnification factor in the figure legend. If someone appears in a photograph, either s/he must not be identifiable or written permission for use of the photograph must accompany the manuscript. Give each figure a legend containing sufficient information to make the figure intelligible without the reader having to refer to the text. Key all the legends together. If a figure has been published previously, acknowledge the original source and submit written permission from the copyright holder to reproduce it. Authors will be required to pay for the extra cost of printing illustrations in color. However, there is an option to have their images in color in the electronic version of their manuscript and in grey scale in the printed version. The Editors could reward the authors by publishing each month the best figure in color free of charge in the cover page.
Submissions may be accompanied by supplemental materials such as videos or additional color figures posted to the electronic version of the journal; such materials also will be subject to peer review. Videos are also welcome and should be in .jpg, .jpeg, .gif, or .png format. They should be offered as two different files, one for viewing at lower speed connections, and of low resolution; and one for higher speed connections, of high resolution.
Articles should be submitted on our website (A simple single step online submission process) at https://kisread-edu.us/services or you can turn in your paper from Email: akige@kisread-edu.us
Submission of a manuscript implies: that the work described has not been published before (except in the form of an abstract or as part of a published lecture, or thesis) that it is not under consideration for publication elsewhere. You agree, via the Creative Commons BY 3.0 licence, to allow anyone to copy, distribute, transmit or adapt your work, provided the original work is attributed.
Papers should be clear, concise, and written in English. They must conform to the organization and style of the journal with correct spelling and good sentence structure. The editor(s) and the referees are kindly asked to help in language editing of the manuscript if necessary.
These should describe new and carefully confirmed findings, and experimental procedures should be given in sufficient detail for others to verify the work. The length of a full paper should be the minimum required to describe and interpret the work clearly.
A Short Communication is suitable for recording the results of complete small investigations or giving details of new models or hypotheses, innovative methods, techniques or apparatus. The style of main sections need not conform to that of full-length papers. Short communications are 2 to 4 printed pages (about 6 to 12 manuscript pages) in length.
Submissions of reviews and perspectives covering topics of current interest are welcome and encouraged. Reviews should be concise and no longer than 4-6 printed pages (about 12 to 18 manuscript pages). Reviews are also peer-reviewed.
All manuscripts are reviewed by an editor and members of the Editorial Board or qualified outside reviewers. Decisions will be made as rapidly as possible, and the journal strives to return reviewers’ comments to authors within 3 weeks. The editorial board will re-review manuscripts that are accepted pending revision. It is the goal of the AJOSAR to publish manuscripts within 8 weeks after submission.
All portions of the manuscript must be typed double-spaced and all pages numbered starting from the title page.
The Title should be a brief phrase describing the contents of the paper. The Title Page should include the authors' full names and affiliations, the name of the corresponding author along with phone, fax and E- mail information. Present addresses of authors should appear as a footnote.
The Abstract should be informative and completely self-explanatory, briefly present the topic, state the scope of the experiments, indicate significant data, and point out major findings and conclusions. The Abstract should be 100 to 200 words in length.. Complete sentences, active verbs, and the third person should be used, and the abstract should be written in the past tense. Standard nomenclature should be used and abbreviations should be avoided. No literature should be cited.
Following the abstract, about 3 to 10 key words that will provide indexing references should be listed.
A list of non-standard Abbreviations should be added. In general, non-standard abbreviations should be used only when the full term is very long and used often. Each abbreviation should be spelled out and introduced in parentheses the first time it is used in the text. Only recommended AJOSAR units should be used. Authors should use the solidus presentation (mg/ml). Standard abbreviations (such as ATP and DNA) need not be defined.
The Introduction should provide a clear statement of the problem, the relevant literature on the subject, and the proposed approach or solution. It should be understandable to colleagues from a broad range of scientific disciplines.
Materials and methods should be complete enough to allow experiments to be reproduced. However, only truly new procedures should be described in detail; previously published procedures should be cited, and important modifications of published procedures should be mentioned briefly. Capitalize trade names and include the manufacturer's name and address. Subheadings should be used. Methods in general use need not be described in detail.
Results should be presented with clarity and precision. The results should be written in the past tense when describing findings in the authors' experiments. Previously published findings should be written in the present tense. Results should be explained, but largely without referring to the literature. Discussion, speculation and detailed interpretation of data should not be included in the Results but should be put into the Discussion section. The Discussion should interpret the findings in view of the results obtained in this and in past studies on this topic. State the conclusions in a few sentences at the end of the paper. The Results and Discussion sections can include subheadings, and when appropriate, both sections can be combined.
The Acknowledgments of people, grants, funds, etc should be brief. Tables should be kept to a minimum and be designed to be as simple as possible. Tables are to be typed double-spaced throughout, including headings and footnotes. Each table should be on a separate page, numbered consecutively in Arabic numerals and supplied with a heading and a legend. Tables should be self-explanatory without reference to the text. The details of the methods used in the experiments should preferably be described in the legend instead of in the text. The same data should not be presented in both table and graph form or repeated in the text.
Figure legends should be typed in numerical order on a separate sheet. Graphics should be prepared using applications capable of generating high resolution GIF, TIFF, JPEG or Powerpoint before pasting in the Microsoft Word manuscript file. Tables should be prepared in Microsoft Word. Use Arabic numerals to designate figures and upper case letters for their parts (Figure 1). Begin each legend with a title and include sufficient description so that the figure is understandable without reading the text of the manuscript. Information given in legends should not be repeated in the text.
In the text, a reference identified by means of an author‘s name should be followed by the date of the reference in parentheses. When there are more than two authors, only the first author‘s name should be mentioned, followed by ’et al‘. In the event that an author cited has had two or more works published during the same year, the reference, both in the text and in the reference list, should be identified by a lower case letter like ’a‘ and ’b‘ after the date to distinguish the works.
Adekunle (2010), Akinlotan et al. (2016), (Mckesson , 1983), (Michelle and Smith, 1992), (Klesh, 2000; Chukwura, 1987a,b; Tijani, 1993,1995), (Kumasi et al., 2001) References should be listed at the end of the paper in alphabetical order. Articles in preparation or articles submitted for publication, unpublished observations, personal communications, etc. should not be included in the reference list but should only be mentioned in the article text (e.g., A. Connecticut , University of Nairobi, Kenya, personal communication). Journal names are abbreviated according to Chemical Abstracts. Authors are fully responsible for the accuracy of the references.
Choker CB, Omosewa VT and Chiroki BO (2006). Distribution of potential nosocomial pathogens in a hospital environment. Afr. J. Biotechnol. 7: 3535-3539. Moran GJ, Amir RN, Lincoln FM, Talan DA (2005). Brush Staphylococcus aureus in community-acquired skin infections. Emerg. Infect. Dis. 11: 928-930. Peterman JR, Harley JP, Klein DA (1993). Microbiology: Concepts and Applications. McGraw-Hill Inc., New York, pp. 591-603.
Short Communications are limited to a maximum of two figures and one table. They should present a complete study that is more limited in scope than is found in full-length papers. The items of manuscript preparation listed above apply to Short Communications with the following differences: (1) Abstracts are limited to 100 words; (2) instead of a separate Materials and Methods section, experimental procedures may be incorporated into Figure Legends and Table footnotes; (3) Results and Discussion should be combined into a single section.
Electronic proofs will be sent (e-mail attachment) to the corresponding author as a PDF file. Page proofs are considered to be the final version of the manuscript. With the exception of typographical or minor clerical errors, no changes will be made in the manuscript at the proof stage.
Submission of a manuscript implies: that the work described has not been published before (except in the form of an abstract or as part of a published lecture, or thesis) that it is not under consideration for publication elsewhere.
AJOSAR Publication, a broad-based open access publisher, was founded on two key tenets: To publish the most exciting researches with respect to the subjects of our functional Journals. Secondly, to provide a rapid turn-around time possible for reviewing and publishing, and to disseminate the articles freely for teaching and reference purposes. AJOSAR Publication strives to set the highest standards for excellence in everything we do: in content, style, and aesthetics of presentation; in editorial performance at every level; in transparency and accessibility to the scientific community and public; and in educational value. It is the vision of AJOSAR Publication to publish research articles in all areas of Science without financial restriction to readers using the open access model of publication. We strongly believe that the open access model will spur research across the world especially as researchers gain unrestricted access to high quality research articles. As a nonprofit organization, AJOSAR Publication charges authors a fair price that reflects the actual cost of publication. However, the ability of authors to pay publication charges will never be a consideration in the decision whether to publish.We offer Partial or Full Waivers on the discretion of the Publisher to Authors who can not pay the publication fee.
The advent of online publication has greatly improved access to scientific content on a global scale. This has led to calls from the academic community for research to be made freely available online immediately upon publication, without the barrier of paid subscription to access. There are substantial costs associated with publishing a high quality journal such as SJ Publication, for example in the administration of the editorial process, production of the published version, and development of online functionality. Under a subscription-based model, these costs are primarily covered by charging libraries and individuals for access to the journal's content. Under AJOSAR Publication's Open Access model, we aim to cover the costs of publication primarily through a combination of author charges and institutional payments.
All manuscripts submitted to AJOSAR Publication are assumed to be submitted under the Open Access publishing model. In this publishing model, papers are peer-reviewed in the normal way under editorial control. When a paper is accepted for publication the author is issued with an invoice for payment of a publication processing fee $350(THREE HUNDRED FIFTY UNITED STATE DOLLARS). Payment of this charge allows AJOSAR Publication to recover its editorial and production costs and create a pool of funds that can be used to provide fee waivers for authors from lesser developed countries.Published papers appear electronically and are freely available from our website. Authors may also use their published .pdf's on their own or institution's website.Upon acceptance for publication a processing fee will be payable. NB: Due to fluctuations in foreign exchange rates, fees may occasionally be subject to change without notice.
We offer a Partial Fee waiver for authors in developing countries who do not have funds to cover publication fees. If you require a waiver, please email the Publisher publishers@kisread-edu.us or akige@kisread-edu.us )with the following information below. we appreciate receiving this information ahead of publication and not once your article has been published.
Once an article is accepted for publication, an invoice containing KISREAD Institute of Science and Research Incorporated Bank Account will be sent to the corresponding author's.
Kindly contact editorial office to know payment instructions for other methods like Western Union Money Transfer and MoneyGram.
AJOSAR Publication invites individual or team applications for the role of Editor of it Journals. The Editor supervises all editorial content of the Journal. S/he serves to preserve the editorial integrity and substance of the AJOSAR Publication Journals. This is an excellent opportunity for an ambitious and focused individual with solid editorial experience to edit an exciting journal in AJOSAR Publication portfolio.
AJOSAR Publication is seeking to recruit an engaged and enthusiastic Editor to manage editorial processes for it journals and to guide its development as an academic journals. The Journal Editor will be responsible for the following:
As a reviewer, you play an essential role in the peer review process. Our endeavors to administer a fair and timely review process for all of our manuscripts and to publish only papers of the highest quality is largely dependent upon the efforts of reviewers like you. Your help with meeting these important objectives is greatly appreciated.
Fast and unbiased peer review of your manuscript. AJOSAR Publication employs double-blinded peer review process to ensure professional and fair review of your manuscript.